Hebei Tengtian Welded Pipe Equipment Manufacturing Co.,Ltd.
Hebei Tengtian Welded Pipe Equipment Manufacturing Co.,Ltd. Quality first, Customer first
Add to Cart
Regulation Speed 25m/Min High Frequency Automatic Tube Mill Auto Produce is the most economical and reasonable molding process is used to continuously and smoothly bend into a seamed tube. Due to the special design of the entire roll structure and its adjustment, it can adapt to the forming of all product sizes and specifications without the need to replace rolls.
The closed-hole type frame part is a three-frame four-high rolling mill, and the rolls need to be replaced according to different product outer diameters. In order to facilitate quick change of specifications, the closed-hole type frame frame is specially designed and installed in a special replacement frame. The connection and separation with the base and the driving part are driven by hydraulic pressure, and the replacement can be completed in tens of minutes.
Material:
| Low carbon steel and low alloy constructional steel |
Mechanical properties
| σb≤520Mpa,σs≤340MPa |
Strip Width | 1020～1665mm |
Strip Thickness
| 4～9mm |
Steel strip coil
| Inner Diameter of Coils:φ508～φ760mm |
Outer Diameter of Coils
| φ1500～φ2100mm |
| Coil Weight | ≤30T |
Pipe Size: Round
| φ325～φ530mm |
Wall Thickness of Pipes | 4～9mm |
Fixed Cutting length | 6～12m |
Pipe-cutting Precision | |
| Forming speed | 5～25m/min |
(1)Power:
Power Volume of the Line Approx.1600KW
Power Source 380V/50Hz/3phases
(2)Circulation Cooling Water:
Flow: 30T/h～40 T/h
Pool Volume: 40m3
(3)Compressed Air
Flow: 5m3/min
Pressure: 5～7kg/ cm2
20m wide,220m long, 8m high,
1.) We will send the engineer for the installation and training your workers how to operate this machine in correct way.
2.) Warranty Team
One year quality guarantee, life guarantee repair. Within quality guarantee period, except for failures caused by human error, repair parts will be provided for free. After the quality guarantee period, only charge the cost of the spare parts.
3.) We supply the pre-sell and after-sell service.
pre-sell service: workshop design, and production output design
after-sell service: installation and training, and the skilled engineer for working.
4.) We can also sent the engineer working for you serval months or 1 year. The engineer will help you to improve the output, reduce the waste and decrease the cost.
5.) We supply the pre-sell service-Design for whole project for stainless steel pipe making/ carbon steel pipe making.
6.) We will be responsible for the loading and shipping .
