Hebei Tengtian Welded Pipe Equipment Manufacturing Co.,Ltd.
Hebei Tengtian Welded Pipe Equipment Manufacturing Co.,Ltd. Quality first, Customer first
Add to Cart
Machine General Introduction
F200x200 quick change roller square pipe High Frequency Welded Pipe Mill is mainly to produce the square pipe size 100x100-200x200mm,rectangular pipe 100x150-100x300mm,thickness is from 5-10mm. This line can produce same size round pipe through change stand and roller .This production line each unit use the most advanced technology, innovative design, full control with PLC control, advanced technology, convenient operation and maintenance, and reached the international level.
(1)Material Specifications: | |
Standard | Internatioanl standard tube mill machine |
Material | galvanized steel |
Mechanical properties | σb≤520Mpa,σs≤365MPa |
Strip Width | 400-800mm |
Strip Thickness: | 5-10mm |
Inner Diameter of Coils | Φ508mm |
Outer Diameter of Coils | Φ1300～φ2000mm |
Coil Weight | ≤25T |
(2)Pipe Specification | |
Pipe Diameter | Square pipe:100x100-200x200mm |
Length | 6-12m |
Pipe-cutting Precision | 0-6mm |
Forming Speed | max 100m/min for 1 mm thickness |
(3)The buyer should self-supply | |
Work shop | 95x12m, H＞5m(crane to ground) |
Power | Approx.2500KW 380V/60Hz/3phases |
Circulation Cooling Water(whole system) | Flow:30+30 CBM |
Compressed Air | Flow:5m3/min |
Cable | All cable outside of my machine, you buy after machine fix location. |
strip steel to coil→uncoiler →end straightener→flattener→shear welder→storage material unit →formed,welding,cooling,accurate pipe Dia. size →accurate pipe length size,cutting→inspection →package
1.In a very short period of time to finish the adjustment of the roller, extreme reduce the roller change time when replace the products, thus improve the efficiency and reduce the productive cost;
2.ue to the equipment adopts one set of combined mould, producing the different specifications of the tube, only need to adjust,no need to change,the roller savings rate at above 90%,thus reducing the cost of the roller; Need change up roller for final open stand when produce 80x80mm tube. This machine can produce round pipe through change some stands or shafts offline.
3.With servo motor adjustment, decreased the input of tools and damage to equipment when change the roll, improve the service life of the equipment.
4.Due to structure of the composite roll,the point contact between the roll and strip instead of the original line contact,reduce the roll wear and improve the service life of roll.
5.Transit motor use the brand of SIMENS BEIDE, Bearings use the brand of NSK,the roller material use High complexing gold Cr20
