Hebei Tengtian Welded Pipe Equipment Manufacturing Co.,Ltd.
Hebei Tengtian Welded Pipe Equipment Manufacturing Co.,Ltd. Quality first, Customer first
Add to Cart
Cut Strip Coil 80m/Min Metal Steel Low Carbon Steel Slitting Machine
I. Introduction
The slitting machine is used to cut the coiled steel plate into several steel strips of a certain width along the length direction, and the slitting unit production line is used to cut the coiled steel plate into several steel strips of a certain width along the length direction. It can be wound into steel strip coils to provide raw material strip steel coils that meet the requirements for cold-formed welded pipe production lines and high-frequency straight seam welded pipe production lines. This unit is divided into full hydraulic type and mechanical type, which has the characteristics of high efficiency, low consumption and high precision.
II. Product advantages
This unit is a mechanical, electrical and hydraulic integrated product, with a series of advantages such as advanced technology, mature technology, convenient operation, simple maintenance, sophisticated manufacturing and high degree of automation.
The purpose of this unit is to feed the steel strip, cut off the head and tail after feeding, unwinding and leveling, and then feed the steel strip to the disc slitter by a leveler. According to the needs of the production process, slitting is cut into steel strips of certain specifications, which are then unloaded and packed after loop buffering, tension winding, and finally stored for storage.
The whole line of the unit adopts PLC electrical control system, DC full digital speed regulation
III. Equipment composition
| NO. | NAME | QUANTITY |
| 1 | Roll stand | 1 |
| 2 | Loading car | 1 |
| 3 | Uncoiler | 1 |
| 4 | Straight head device | 1 |
| 5 | Pinch leveling machine | 1 |
| 6 | cut to length shear | 1 |
| 7 | Throwing roller | 1 |
| 8 | Stacking machine | 1 |
| 9 | Vertical roller device | 1 |
| 10 | Disc shear | 2 |
| 11 | Scrap coiler | 1 |
| 12 | Accumulator device | 1 |
| 13 | Pre-separation device | 1 |
| 14 | Tension device | 1 |
| 15 | Winder | 1 |
| 16 | Unloading trolley | 1 |
| 17 | Hydraulic system | 1 |
| 18 | Electronic control system | 1 |
IV. Product parameter specifications
| Specification | thickness | width | coil weight | Finished product width | Number of cut strips | Shear speed | floor space | Tool shaft diameter |
| 2.5×800 | 0.5-3mm | 400-800mm | 12 | ≥30mm | ≤20 | 70m/min | 20×10 | 200 |
| 3×1250 | 0.5-3mm | 800-1250mm | 18T | ≥30mm | ≤15 | 60m/min | 20×10 | 220 |
| 3×1600 | 0.5-3mm | 900-1600mm | 20T | ≥40mm | ≤13 | 60m/min | 21×11 | 240 |
| 4×1600 | 0.5-4mm | 900-1600mm | 25T | ≥60mm | ≤13 | 50m/min | 21×11 | 260 |
| 6×1600 | 1-6mm | 900-1600mm | 30T | ≥60mm | ≤10 | 40m/min | 21×11 | 260 |
| 8×2000 | 2-8mm | 900-2000mm | 35T | ≥70mm | ≤6 | 30m/min | 30×11 | 300 |
| 10×2200 | 3-10mm | 900-2200mm | 35T | ≥80mm | ≤5 | 25m/min | 35×11 | 320 |
| 12×2200 | 3-12mm | 900-2200mm | 35T | ≥100mm | ≤5 | 20m/min | 38×11 | 320 |
| 16×2500 | 4-16mm | 900-2500mm | 35T | ≥100mm | ≤5 | 20m/min | 38×11 | 400 |
| 20×2500 | 6-20mm | 900-2500mm | 35T | ≥100mm | ≤4 | 20m/min | 38×11 | 480 |
V. Factory appearance
