Tube Diameter 8-51mm Stainless Steel Pipe Tube Mill Machine CE ISO Standard

1.Name of products :Tube Mill Machine

We endeavor to adont high precise gear driving spindle to lower the malfunction in the process of operation to the greatest.meanwhile, we present a complete series machines to satisfy you.


Pipe making machine consists of 6 parts as normal process:

1.Uncoiler stage :is also called feeder,which is mainly used for placing raw materials.

2.Forming machine and welding machine stage :Including two parts of forming and welding,mainly the steel strip on the loading rack is introduced into the forming welding unit through the feeding guide device and the argon arc welding machine is welding and forming.

3.Grinding stage :After welding,there will be a high weld on the surface of the pipe ,so the weld will be polished by the grinding unit (there are three grinding head) to make the surface smooth and flat.

4.Sizing and straightening stage :After the pipe is basically shaped,the pipe diameter and bending degree need to be fixed by the straightening set,otherwise there will be problems such as insuffcient roundness,square degree and pipe straightness.

5.Fixed-length cutting machine :After the pipe is made the cutting machine is ready to cut ,it is usually cut once every 6m,of course it can be cut once at 4m or 5m,this requires you to set it youself.

6.Unloading table :After the pipe is cut to length the lower rack rack is needer to place the tubes.


Main features:
1. High level intelligent industrial pipe making machine.
2. Good welding mechanical properties.
3. High finished rate with low product cost.
4. Users-friendly and easy to maintain.
5. Well-structured and complete in specification.

Main Producing Process: