Hebei Tengtian Welded Pipe Equipment Manufacturing Co.,Ltd.
Hebei Tengtian Welded Pipe Equipment Manufacturing Co.,Ltd. Quality first, Customer first
Add to Cart
The HG60 mill is intended for manufacturing of round pipe of Φ22mm-Φ76mm thickness is 0.8-3.5mm from cold-rolled and hot-rolled coil strip by means of unclosed tubular blank with its subsequent welding into tube, edge heating by means of solid state high-frequency welder, longitudinal seam welding in rolls of tube welding machine, cooling, further sizing or shaping and on-stream cutting of endless tube in measured lengths.
ERW Pipe making machine Technical Process:
Raw material(steel coil)→Uncoiling→shearing and butt welding→material accumulator→passively leveling→mill forming→high frequency welding→removing butts outside of weld seam→cooling→sizing→roughly straightening→fixed length cutting→runout table
Welded pipe making machine consists of the following parts:
1. Forming parts: Consist of seven frame of horizontal roll rack,four frame of empty curving rack,four frame of vertical roll rack and one frame of feeding rack
2. Welding parts: consists of welding five roller of extruding roll,two frame of scraping scar rack and one frame of polish rack
3. Sharping parts: consists of four frame of four roller rack
4. Electric control part: controlled by multipoint PLC point
Machine parts pics as belowe:
| Doubel head uncoiler | Cage loop accumulator |
| Automatic shearing and welder | Forming and sizing machine |
| Computer flying saw | Solid high frequency welder |